|

![[Contents]](images/btoc.gif) ![[Home]](images/bhome.gif) ![[Products & Services]](images/bprdsrv.gif) ![[What's New]](images/bnews.gif) ![[Feedback]](images/bfeed.gif)
JACircuits Autocross Timer
The second generation
JACircuits timer is designed to have outstanding efficiency and reliability at a
reasonable cost. Since the system is microprocessor based, it is quite flexible
while remaining user friendly. The system retains the same basic functionality of
its predecessor but has been made more flexible and incorporates all of the suggested
enhancements requested by current and potential customers over the last few years.
The hardware was designed to provide owners with a system that is very flexible, and can
accommodate future enhancements. The timer and has 2 serial ports and 1 parallel
printer port for communicating with large format displays, PCs, and printers.
Currently, the timer software can run in 3 modes:
- Sequential Mode (up to 8 cars simultaneously)
- JACircuits Mode (emulate the original
JACircuits timer)
- Optional Chrono Mode - Timer uses input to
all 4 photoheads. All control signals and timer status sent out serial port to PC
The Basic system comes with:
- timing unit (4 display)
- 2 photoheads (either retro-reflective laser
or through-beam infrared)
- 2 100 foot cables (standard connectors)
- power cable (runs off the cigarette lighter)
- user's manual
These options further enhance the
flexibility and robustness of the basic unit.
- The internal battery is a rechargeable gel
cell that allows 8-12 hour operation with no additional input power. This could be used as
backup power or for truly portable operation.
- The large format display uses 6" digits
and can be easily seen from 500 feet. These are very popular at large Solo II events
.
Pricing
Key Features
-
Microprocessor based for flexible system design
-
Accommodates up to 4 photoheads
-
"Hands Off" System
- Works Automatically
-
4 Display System 999.999 sec
-
Retroreflective or thru-beam photoheads
(100' range)
-
12V input voltage @ 0.25 amp (photoheads
included)
-
Serial & Parallel Output Ports for Communication with Computer
and Large Displays
-
5½" x 12" x 8" steel case
-
System "beeps" when photohead triggered
Information Request Form
Select the items that apply, and then let us know how to contact you.
![[Contents]](images/btoc.gif) ![[Home]](images/bhome.gif) ![[Products & Services]](images/bprdsrv.gif) ![[What's New]](images/bnews.gif) ![[Feedback]](images/bfeed.gif)
Send mail to
webmaster@jacircuits.com
with questions or comments about this web site.
Copyright © 1996 JACircuits Autocross Timing Systems
Last modified:
January 09, 2005
|